fl400 series single phase bridge rectifiers features: ? ? in-line miniature single phase silicon bridge. ? ? surge overload rating: 200 amperes peak. ? ? ideal for printed circuit board. ? ? reliable low cost construction utilizing moulded plastic technique. mechanical data: terminals : lead solderable per mil-std-202, method 208. mounting position : any. weight : 0.2 ounce, 5.6 grams. parameter FL401 fl402 fl406 units maximum recurrent peak reverse voltage 100 200 600 v maximum rms bridge input voltage 70 140 420 maximum dc blocking voltage 100 200 600 maximum average rectified output current at 50c ambient 4.0 a peak one cycle surge overload current 200 maximum forward voltage drop per bridge element at 4.0a dc 1.1 v maximum (total bridge) reverse leakage at rated dc blocking voltage 10.0 a page 1 31/05/05 v1.0 fl dimensions : inches (millimetres)
fl400 series single phase bridge rectifiers page 2 31/05/05 v1.0 rating and characteristics curves parameter FL401 fl402 fl406 units maximum (total bridge) reverse leakage at rated dc blocking voltage and 100c 1.0 ma i 2 t rating for fusing ( t <8.3ms) 93.0 a 2 seconds typical thermal resistance per leg (note 2) r ja (note 3) r jl 19.0 2.4 c/w operating temperature range -55 to +125 c storage temperature range -55 to +150 notes: 1. thermal resistance from junction to ambient with units mounted on 3.0? x 3.0? x 0.11? thick (7.5 x 7.5 x 0.3cm) aluminium pl ate. 2. thermal resistance from junction to lead with units mounted on pcb at 0.375? (9.5mm) lead length and 0.5 x 0.5? (12 x 12mm) copper pads. forward surge current, amperes pk (half sine wave) figure 1 - maximum overload surge current number of cycles at 60hz instantaneous forward current, amperes instantaneous forward voltage, volts figure 2 - typical forward characteristics (25c)
fl400 series single phase bridge rectifiers page 3 31/05/05 v1.0 v rrm (v) maximum input voltage (v ac) pin spacing current rating (a) body part number height width depth 100 70 5.1 4 15.9 19.0 6.4 FL401 200 140 fl402 600 420 fl406 specifications percent of rated peak reverse voltage figure 3 - reverse characteristics instantaneous reverse current, a forward surge current, amperes pk (half sine wave) figure 4 - non-recurrent surge rating number of cycles at 60hz dimensions : millimetres
|
